Product ID:ZA-43 KIT; SKC-NF/ZC-7B CLEANER (PRE 12/88)
MSDS Date:09/16/1983
FSC:6850
NIIN:00-703-7406
Kit Part:Y
MSDS Number: BFLZG

MAGNAFLUX CORPORATION

7300 W. LAWRENCE AVENUE
CHICAGO, IL 60656-3504
US

Emergency Phone: 708-867-8000, CHEMTREC 800-424-9300

Info Phone: 708-867-8000

Cage: 37676

ILLINOIS TOOL WORKS INC MAGNAFLUX DIV

GLENVIEW, IL 60025 US

Telephone: 847-657-5300/

Cage: 37676

METHYL CHLOROFORM (1,1,1-TRICHLOROEHANE) (SARA III)

CAS: 71-55-6

RTECS: KJ2975000

Fraction By Weight: 97%.

OSHA PEL 350 PPM/450 STEL

ACGIH TLV: 350 PPM/450STEL;9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

CARBON DIOXIDE

CAS: 124-38-9

RTECS: FF6400000

Fraction By Weight: 3%.

OSHA PEL 5000 PPM

ACGIH TLV: 5000PPM/30000STEL;93

Routes of Entry: Inhalation:YES Skin:UNKNOWN Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Effects of Overexposure:DIZZINESS INITIALLY,LOSS OF CONSCIOUSNESS
EVENTUALLY

First Aid:REMOVE TO FRESH AIR

Flash Point:NONE
Extinguishing Media:NOT APPLICABLE-NONE FLAMMABLE
Unusual Fire/Explosion Hazard:AEROSOL CANS MAY BURST IF HEATED ABOVE
130F.VAPOR CAN BE TOXIC WHEN EXPOSED TO FLAMES,HOT SURFACES

Spill Release Procedures:IF AEROSOL QUANTITIES ARE SPILLED,ALLOW TO
EVAPORATE,WIPE UP ANY RESIDUE

Handling and Storage Precautions:STORE AWAY FROM HEAT.AVOID USING NEAR
FLAME,ARCS,HOT SURFACES

Respiratory Protection:IF USED IN CONFINED AREA,USE MASK WITH SEPARATE
AIR SUPPLY
Ventilation:LOCAL PREFERRED
Protective Gloves:AS NEEDED
Eye Protection:YES-IF LIQUID CAN SPLASH
Supplemental Safety and Health
KEY1:J7. KIT CONSISTS OF FOUR PARTS; SEE ADDITIONAL DATA FOR NAMES OF
PARTS. THIS ENTRY DESCRIBES PART ONE - CLEANER/REMOVER,
SKC-NF/ZC-7B. FORMULATION CHANGED DURING 1989. THIS IS UPDATE OF
OLD ENTRY .

HCC:V3
Boiling Pt:B.P. Text:165F
Vapor Pres:230
Vapor Density:4-5
Spec Gravity:1.3
Evaporation Rate & Reference:5,ETHER
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR,COLORLESS LIQUID,SWEET ODOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
ALKALI METALS. WILL SOFTEN MANY PLASTICS & COATINGS.
Stability Condition to Avoid:FLAME,ARCS,HOT SURFACES
Hazardous Decomposition Products:HYDROROCHLORIC ACID,PHOSGENE

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.